Steps on How to Clean Baby Brezza Bottle Warmer

Are you familiar with Baby Brezza bottle warmer? If you come across this article, the chance is that you already are. This product helps to warm milk and food for babies without consuming much time. However, have you mastered the procedure required to keep it clean between uses? The following post presents detailed breakdowns of how to clean Baby Brezza Bottle Warmer on a regular and monthly basis.

How to Clean Baby Brezza Bottle Warmer

For a regular cleaning in between uses, the bottle warmer needs to be cooled down and cleaned of any remaining water. Simple rinse the appliance under running water and wipe the interior compartment down to store it dry afterward.

how to clean baby brezza bottle warmer

If necessary, wash the inside compartment (where the bottle is held inside) with warm, soapy water. The outer part can be simply wiped down with a damp fabric regularly to get rid of any potentially accumulated grime or dirt. Note that you don’t need to use harsh-textured pads or sponges and possibly damaging chemicals to clean the outer part of the bottle warmer.

Meanwhile, for monthly cleaning, it’s recommended to descale the accumulated mineral. Follow the Baby Brezza cleaning instructions below:

Step 1: Prepare the appliance

Make sure the bottle warmer is completely cooled down before performing the steps below:

  1. Unplug the bottle warmer.
  2. Detach the orange-colored holder.
  3. Drain any excess water inside.

Step 2: Pour the descaling solution

A descaling solution can be made simply by mixing water and white vinegar. However, you can also purchase the dedicated liquid product for cleaning this product, which is available on the official website or Amazon account of Baby Brezza.

Before adding the descaling solution, especially if you’re using vinegar, make sure that the room has proper ventilation. To avoid unwanted injury, let the bottle warmer cool off after use first.

Afterward, follow the instructions below:

  1. If you choose to use a DIY descaling solution, mix 2:4 oz. White vinegar and water in a plastic container.
  2. Set the bottle warmer on the counter.
  3. Pour the descaling solution or Baby Brezza solution into the water compartment of the bottle warmer.
  4. Operate one heating cycle on the number 5 setting.
  5. Let the operation run for approximately 5 minutes.

Step 3: Rinse the appliance

  1. Let the bottle warmer cool down after the descaling process.
  2. Drain and rinse the appliance to get rid of the potential remaining solution.
  3. Wipe the water compartment dry.
  4. Use clean fabric or paper towel and spoon to reach the bottom part of the water compartment.
  5. Allow the bottle warmer to air dry without closing the upper part.

Optional step: Eliminating mold

If you notice growing mold on the bottle warmer appliance, it is recommended to immediately clean it off by using a descaling solution that let’s sit overnight.

  1. If you choose to use a DIY descaling solution, mix 1/3:1/3 cup white vinegar and water in a plastic container.
  2. Pour the descaling solution or Baby Brezza solution into the water compartment of the bottle warmer.
  3. After a night, rinse the appliance and air dry it. You can use it as usual later.

Baby Brezza Bottle Warmer Instructions

In conclusion, if you want to clean the bottle warmer product, you need to cool it down first. You may choose to use a DIY descaling solution which is a mix of vinegar and water, or buy the manufacturer’s solution product. Don’t forget to rinse the solution, wipe it clean, and allow it to dry.

The last note that you need to take an account when learning how to clean Baby Brezza Bottle Warmer is to avoid using rough or harsh products or tools. All in all, you are good to go by following the guides above.